Description
Specifically designed to fit the HX35W and similar turbochargers found on OEM 96-02 DODGE RAM 2500 and 3500 trucks with the 5.9L. The blanket efficiently covers the turbine housing while giving the wastegate arm assembly full range of motion.
This blanket is designed to fit the OEM and similar aftermarket HX35 turbochargers.
The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat. The blankets are made with high quality 1 inch thick 6 pound density ceramic insulation material and covered with a silicone based outer shell that is colored either Black, Red, Blue, Chrome, or Gray. Since vibration on a turbocharger is inevitable we have created a more durable design. Our turbo blankets feature a knitted wire mesh inner layer that separates the insulation material from the turbocharger housing, greatly increasing durability and reducing breakdown.
Installing a Thermal Zero Turbo blanket will cut down up to 80% of direct heat emitted from your turbocharger. In turn this will allow the turbo to spool faster and be more efficient.
Not sure if this blanket will fit your turbo. Check the known good fit turbo models below or measure your turbo and check the measurement picture above to verify it will be a good fit.
| Suggested Turbocharger Models: | ||||
| Holset Hx35W | 3539373 | 3539374 | 3802994 | HX35W-L8274M/E12BC11 |
| 3537815 | 3575215 | 4038473 | ||
All Thermal Zero blankets are hand made here in Cincinnati, Ohio USA. If you can’t find exactly what you need or have questions about fitment? Call us at 513.696.9727, we probably make it or can help you.
